-
Air driven after coolers
Air Driven After Coolers
Product Features
PanBlastTM Compressed Air After Coolers are available in various sizes and specifications to suit varying market requirements worldwide. All units are portable, driven by a compressed air motor, and do not require an electrical supply for operation.
Designed and manufactured in accordance with international standards and requirements.
Industrial air motor driven, on electrical supply required.
Fan-aluminum hub, polypropylene blades.
Brazed bar and plate aluminum core.
Aluminum core heat exchanger.
1034 kPa (150pis) maximum operating pressure.
Low maintenance and operating cost.
Energy efficient.
Maximum pressure drop < 3psi. Available flow rates 250-3000 CFM. Ergonomic portable site design. Coolers should not operate in ambient temperatures below 35 °F (1°C). Heavy duty compact design and rugged heavy duty construction. Eliminates abrasive moisture contamination. No equipment or airline freeze ups. Common Applications Compressed air preparation for all types of blasting applications Used in conjunction with desiccant or deliquescent dryers for removal of up to 90% moisture. In high humidity environments for maximum blasting productivity and reduced abrasive wastage. -
Moisture Separators
Moisture Separators
Product Features
PanBlastTM Moisture Separators remove excess moisture from the compressed air supply to the blast pot. This reduces clogging due to wet abrasives and prevents moisture from entering the blast stream.
Various size available to fit most blast pots.
Replaceable, 40 micron sintered bronze filter sleeves.
Manual drain allows emptying separator body as required.
Common Applications
Automated high production blasting systems.
Blast cabinet applications.
Respirator airline filter applications.
On site industrial and commercial blasting.
Blast and painting contractor yard work.
Blast room applications with or without abrasive recovery systems.
In site blasting in shipyards and slipways. -
Pressure Regulators
Filter Regulators and Pressure Regulators
Product Features
PanBlastTM Filter and Pressure Regulators are available in multiple port sizes and configuration to suit varying application requirements. Both types of regulators come in robust die cast bodies and can be used to accurately regulate compressed air supply pressure. The filter regulator has additional moisture and particulate removal capabilities.
Filter regulator is fitted with a 40 micron sintered bronze filter element.
Filter regulator is fitted with a manual drain for water discharge.
Filter regulator is available in 6mm (1/4”), 9.5mm (3/8”) and 13mm (1/3”) port sizes.
Pressure regulator is supplied with accessory port for pressure gauge fitment.
Pressure regulator is available in 6mm (1/4”), 9.5mm (3/8”), 13mm (1/2”), 19mm (3/4”) and 25mm (1”) port sizes.
Common applications
Automated high production blasting systems.
Blast cabinet applications.
Respirator airline filter applications.
On site industrial and commercial blasting.
Blast and painting contractor yard work.
Blast room applications with or without abrasive recovery systems.
In situ blasting in shipyards and slipways.
6MM (1.4”) Filter Regulator With Gauge.
9.5MM (3.8”) Filter Regulator With Gauge.
13MM (1.2”) Filter Regulator With Gauge.
6MM(1.4”) Pressure Regulator With Gauge.
9.5MM (3.8”) Pressure Regulator.
13MM (1.2”) Pressure Regulator.
19MM (3.4”) Pressure Regulator With Gauge.
25MM (1”) Pressure Regulator With Gauge.
